Description: For purchasing this kit, please go to www.taipeitrading.com website.
The TrueSense Kit (TSK) is the first affordable, ultra-compact, ultra-low-power, bio-signal acquisition kit that allows bio-signal capturing anywhere, any time and on multiple body locations. The bio-sensor DIY kit can capture various bio-signals conveniently and has capabilities comparable to products like EEG, EKG monitors. However, the DIY kit is not considered a medical device and should not be used for monitoring or treating a medical condition.
Follow Start-123 to start using the DIY Kit within minutes. For more detailed descriptions, Please read Get Started with TrueSense Kit: a Brief Manual to learn how to operate the DIY Kit.
Long long press (more than 6 seconds) of the "-" button will SHUTDOWN the Controller, a long press (more than 3 seconds) of the “-” button will turn-OFF the Controller, and a long press (more than 3 seconds) of the “+” button will turn-ON the Controller.
The TrueSense Kit (TSK) consists of 3 main components, the sensor (S), the memory module (M) and the controller (C), plus various accessories to make taking bio-signal measurements easy. (Note: the Exploration kit and the ReLax kit are not compatible with each other, due to differences in sample rate and RF settings.)
1. The Sensor (S): suitable for measuring EEG, ECG/EKG, EMG signals, capturing motion and posture activities, as well as environmental electromagnetic pollutions (EMP).
- 2-electrode (bipolar) signal acquisition, 2000X high gain amplifier
- 512Hz sampling rate, 13bit effective dynamic range
- Built-in 3D (XYZ) accelerometer for motion and posture capturing
- Rechargeable LIR1220 button cell, typically >16hrs use time with full charge
- Off-line bio-signal recording of 11+ hours when memory module (M) is mounted (must use USB for data upload)
- Proprietary low-power (limited RF range) ZigBee (2.45GHz) TDMA wireless signal transfer for interactive sessions
- Support for multiple sensors, multiple controllers, time synchronized operations
- Dry or Gel (multiple use) mini-electrode configurations
2. The Memory Module (M):
- Off-line bio-signal recording of 11+ hours when mounted on sensor (S)
- High quality data (must use USB for data upload)
- Off-line data upload to computer through the Controller (C)
3. The Controller (C):
- Connects to computer USB port for interactive or off-line bio-signal data transfer and battery charging
- Dual buttons (Positive, Negative) and 4 LED's for easy tagging and event markers
- Rechargeable LIR2032 button cell, typically >48hrs use time with full charge
- Proprietary low-power (limited RF range) ZigBee (2.45GHz) TDMA wireless signal transfer for interactive sessions
- Support for multiple sensors, multiple controllers, time synchronized operations
4. Carrying Case and Accessories (A):
- Compact metal box (80mm x 34mm x 10mm) for easy carrying and protection
- Dry electrode set (silver coated electrode, plain mylar patch)
- Gel electrode set (silver coated mylar patch, reusable adhesive Gel pads)
- Flexible silicone head-band and elastic string
- Preformed adhesive tapes
- USB cable
- Nonstick protective sheet